Spacelog Apollo 13

Roger. And, on panel 275, we want all the circuit breakers open; no exceptions. Over.

Panel 275, all open; no exceptions.

Okay, and that's all for page 1-10. You want to read any of that back? I think you've got it all.

No, I think I've got it all.

Okay. Let's go to page 1-11. On panel 276, no change; on panel 278, we want all circuit breakers open; no exceptions. Over.

Panel 278, all open.

Roger. Now we'll skip all the way down to panel 306 where we want the MISSION TIMER to STOP and the EVENT TIMER to STOP. Over.

Okay. Panel 306, MISSION TIMER, STOP; and EVENT TIMER, STOP.

Okay. And those are all the changes on 1-11, Jack.

Okay. Ready for 1-12.

Okay. On page 1-12, panel 325, we want both CABIN PRESSURE RELIEF valves to NORMAL. Over.

Okay. Both to NORMAL.

That's affirmative. Panel 350, no change. Panel 351, MAIN REGULATOR valves, two, to CLOSED, and the H₂O/GLYCOL TANK PRESSURE REGULATOR valve, OFF, and RELIEF valve, OFF. Over.

Okay. MAIN REG valve, two, to CLOSED. WATER/GLYCOL TANK PRESSURE REG and RELIEF valves, both OFF.

Okay. That's affirm. Those to the left, changes on 1-12. Let's go to 1-13.

Okay. Ready to copy.

Okay. Go down to panel 380, O₂ DEMAND REG valve, OFF, and SUIT CIRCUIT RETURN VALVE, pulled to OPEN. Over.

Okay, both O₂ DEMAND REG valves are OFF and SUIT CIRCUIT RETURN VALVE pulled OPEN.

That's correct. Go to panel 382. The first one, two, three, four are unchanged. We want SEC EVAP H₂O CONTROL valve OFF, and PRIM EVAP H₂O CONTROL valve to OFF. Those both are both counterclockwise. Over.

Okay, Houston. Reading back 382, SECONDARY EVAPORATOR H₂O CONTROL valve's OFF, and PRIMARY EVAPORATOR H₂O CONTROL valve, OFF.

That's correct. Those are the only changes on 1-13, and there are no changes on 1-14, and you've got it all, Jack. Over.

Okay. Real good, Joe. … configures for that panel.

Okay. You can get those configures when you can. And the next order of business I've got for you is a procedure to verify that MAIN BUS B is good. And a little after that, we'll want to read up to you, for your future information, a procedure for transferring LM power to the command module. Over.

Okay. That sounds good. You want to get this PLSS configuration done first before you give those other procedures, huh?

Yes, I think so. Stand by 1 second and I'll see if FLIGHT has any words for us before you start that.

Jack, Houston. Over.

Go ahead.

Okay, we don't have anything for you. Our only concern is that you'll wake up somebody; is there anybody sleeping right now?

No. We're all sitting here eating. I'm just going to get a bite to eat. Then I'll write down that switch configuration, or I'll copy the procedure now, if you want.

Yes, okay. Understand they are all up. Did you say you wanted to copy the other procedure now? Over.

I can if you want. It's your choice.

I'd rather you went ahead with the switch configuration, Jack.

Okay, let's do that and then I'll be back with you.

Okay. See you later. And tell Jim that Deke wants him to go to bed.

Okay. I'll tell him that right now.

Okay.

I'll tell you, I'll get my switch set done first before I eat so I won't disturb Jim any.

Aquarius, Houston. Over.

Go ahead.

Stand by 1 minute, Jack, before you go in there. FLIGHT has got one other item for you.

Deke wants you to go to bed.

Right now.

… like that … I got up about 1 hour …

You know what I thought—I think what we saw venting was the result of our DELTA-Vs stirring up things, popping the relief valve. Yes. We don't see anything venting now. …

Okay, Houston. We are standing by.

Aquarius, Houston. Over.