Apollo 13 transcript starting at 03 20 02 38 on Spacelog

Load previous…

03 20 02 38
Joe Kerwin (CAPCOM): Okay —
03 20 02 40
Jack Swigert (CMP): Joe, are you with me? —
03 20 02 41
Joe Kerwin (CAPCOM): Jack, Houston. The COMM kind of gets better and worse and the last one I copied was RCS TRANSFER to center. Start from there.
03 20 02 51
Jack Swigert (CMP): Okay. And that's exactly where I was. COMMAND MODULE RCS PROPELLANT 2, center, on, up; PROPELLANT talkbacks, two, gray; SERVICE MODULE RCS SECONDARY FUEL PRESSURE, four, center, and CLOSED; EDS AUTO, OFF; COMMAND MODULE/LM FINAL SEP, two, off; COMMAND MODULE/SERVICE MODULE SEP, two, down; S-IVB/LM SEP, off, down, guarded; PROPELLANT DUMP to RCS COMMAND; 2 ENGINE OUT and LV RATES, OFF.
03 20 03 27
Joe Kerwin (CAPCOM): Okay. That's correct. Let's go to page 3, and the first one on page 3, TOWER JETT, two to OFF. Over.
03 20 03 41
Jack Swigert (CMP): Okay.
03 20 03 42
Joe Kerwin (CAPCOM): Okay. The next one, two, three, four, five, six, seven are the same, and then we get CAUTION/WARNING NORMAL to ACK, CAUTION/WARNING CSM to CM, and CAUTION/WARNING POWER to OFF. Over.
03 20 04 05
Jack Swigert (CMP): Okay. Got it.
03 20 04 06
Joe Kerwin (CAPCOM): Okay. The next one, two, three, four are the same, and then we get to the H₂ HEATERS, two, OFF; and the O₂ HEATERS, two, OFF. Got that?
03 20 04 21
Jack Swigert (CMP): Yes. … we don't have any H₂ or O₂ … Okay.
03 20 04 29
Joe Kerwin (CAPCOM): Okay, Jack. Those are the only changes on page 1-3.
03 20 04 37
Jack Swigert (CMP): Okay. POWER JETT, two, OFF. And then I'll just go on down: CAUTION and WARNING NORMAL to ACKNOWLEDGE; CAUTION and WARNING CSM—CAUTION and WARNING CSM to CM; CAUTION and WARNING POWER, OFF; H₂ and O₂ HEATERS, OFF.
03 20 04 58
Joe Kerwin (CAPCOM): That's correct, Jack. Those are the only changes on 1-3. Now, let's go to 1-4. No changes on the remaining three panel 2 switches. On panel 3, the first one, two, three, four are unchanged and then we want FUEL CELL HEATERS, three, to OFF. Over.
03 20 05 19
Jack Swigert (CMP): Okay.
03 20 05 21
Joe Kerwin (CAPCOM): Okay. The next one, two, three, four, five, six, seven, eight are the same, and then we want FUEL CELL 2 MAIN BUS A to OFF; and, skipping one, we want FUEL CELL 2 MAIN BUS A to OFF. Over.
03 20 05 45
Jack Swigert (CMP): Okay.
03 20 05 46
Joe Kerwin (CAPCOM): Okay. Skip two, and then we want FUEL CELL 3 MAIN BUS A talkback to gray. Over.
03 20 06 00
Jack Swigert (CMP): Okay.
03 20 06 01
Joe Kerwin (CAPCOM): Okay. The next one, we want MAIN BUS A RESET to OFF; skip one, and we want FUEL CELL 1 MAIN BUS B talkback to gray. Over.
03 20 06 17
Jack Swigert (CMP): Okay.
03 20 06 18
Joe Kerwin (CAPCOM): Okay. Skip one, and we want FUEL CELL 2 MAIN BUS B talkback, gray; and, the next one, we want FUEL CELL 3 MAIN BUS B to OFF. Over.
03 20 06 31
Jack Swigert (CMP): Okay. Copied that.
03 20 06 32
Joe Kerwin (CAPCOM): Okay. Skip one, and we want MAIN BUS B RESET to OFF. Over.
03 20 06 42
Jack Swigert (CMP): Okay.
Expand selection up Contract selection down Close
03 20 06 43
Joe Kerwin (CAPCOM): All right. Then the next one, two, three, four, five, six are the same, and then we want S-BAND TRANSPONDER to center, OFF; skip one, and we want S-BAND POWER AMPLIFIER, HIGH to center, OFF; and the POWER AMPLIFIER talkback to barber pole. Over.
03 20 07 10
Jack Swigert (CMP): Okay. Read back the changes on this page—Stand by. I … another OMNI.
03 20 07 27
Joe Kerwin (CAPCOM): Jack, Houston. Start in again. I wasn't copying that.
03 20 07 34
Jack Swigert (CMP): Okay. I've just got to switch OMNIs. Okay. Reading the changes, Joe, on pages 1-4, FUEL CELL HEATERs three, OFF, coming down to FUEL CELL 1 MAIN BUS A center—MAIN BUS A to OFF; MAIN BUS—FUEL CELL 2 to MAIN BUS A, OFF; FUEL CELL 3 to MAIN BUS A, talkback, gray; MAIN BUS A RESET to OFF; FUEL CELL, 1 to MAIN BUS B talkback, gray; FUEL CELL 2 to MAIN BUS B talkback, gray; FUEL CELL 3 to MAIN BUS B to OFF; MAIN BUS B RESET, OFF; S-BAND TRANSPONDER to OFF; S-BAND POWER AMPLIFIER, HIGH to OFF; POWER AMPLIFIER talkback barber pole.
03 20 08 33
Joe Kerwin (CAPCOM): Okay, Jack. That's completely correct on 1-4. Let's go to 1-5, and on that page the first one, two, three, four, five, six are the same, and we want UP TELEMETRY COMMAND to OFF. Over.
03 20 08 53
Jack Swigert (CMP): Okay.
03 20 08 55
Joe Kerwin (CAPCOM): Okay. The next one, two, three are the same, and we want VHF AM B to center. Over.
03 20 09 06
Jack Swigert (CMP): Got it.
03 20 09 08
Joe Kerwin (CAPCOM): The next one, two, three, four are the same, and we want S-BAND SQUELCH to OFF, and FUEL CELL REACTANT VALVE, to NORMAL. Over.
03 20 09 22
Jack Swigert (CMP): Okay.
03 20 09 23
Joe Kerwin (CAPCOM): Okay. The next one, two, three are the same, and then we want TAPE RECORDER FORWARD to center; TAPE MOTION talkback, barber pole; SCE POWER to center; and PMP POWER to center. Over.
03 20 09 46
Jack Swigert (CMP): Okay.
03 20 09 47
Joe Kerwin (CAPCOM): Okay. Skip the next one, and we want AC INVERTER 1 to OFF, and AC INVERTER 2 to OFF. Over.
03 20 10 01
Jack Swigert (CMP): Okay.
03 20 10 02
Joe Kerwin (CAPCOM): Okay. Skip the next one, and we want INVERTER 1 AC 1 to OFF, and skip two and we want AC 1 RESET to OFF. Over.
03 20 10 14
Jack Swigert (CMP): Okay.
03 20 10 15
Joe Kerwin (CAPCOM): Okay. Skip 1, and we want INVERTER 2 AC 2 to OFF; and skip 1, and we want AC 2, BUS to RESET—AC 2 BUS RESET to OFF.
03 20 10 34
Jack Swigert (CMP): Okay.
03 20 10 35
Joe Kerwin (CAPCOM): That was AC 2 BUS RESET, wasn't it? Okay. Skip the next one, and on panel 4, we want SPS GAGING to OFF; TELCOM GROUP 1 to OFF; TELCOM GROUP 2 to OFF; and GLYCOL PUMPS to OFF. Over.
03 20 11 00
Jack Swigert (CMP): Okay. Reading back UP TELEMETRY COMMAND to OFF; VHF AM B, center; S-BAND SQUELCH to OFF; FUEL CELL REACS VALVES to NORMAL; TAPE RECORDER FORWARD, center; TAPE MOTION, barberpole; SCE POWER, center; PMP POWER, center; AC INVERTER 1, OFF; AC INVERTER 2, OFF; INVERTER 1 to AC 1, OFF; AC 1 RESET, OFF; INVERTER 2 to AC 2, OFF; AC 2 BUS RESET, OFF; and coming to panel 4, SPS GAGING; TELCOM, GROUP 1; TELCOM, GROUP 2; and GLYCOL PUMPS all OFF.
Expand selection down Contract selection up
03 20 12 03
Joe Kerwin (CAPCOM): Okay. That's correct on 1-5, Jack. Let's go to the 1-6. And the first line we want SUIT COMPRESSORS, both, to OFF. Over.
03 20 12 46
Joe Kerwin (CAPCOM): Okay, Jack; Houston. It's noisy again; I didn't copy your Roger on that.
03 20 12 55
Jack Swigert (CMP): Okay. How do you read now, Joe?
03 20 12 58
Joe Kerwin (CAPCOM): You're loud and clear now, and let's go to panel 5. We want FUEL CELL PUMP AC 1, OFF; AC 2, OFF; and that's the FUEL CELL 1 PUMP, AC 1, OFF; FUEL CELL 2 PUMPS, AC 2, OFF; FUEL CELL B PUMPS, AC 2, OFF; G/N POWER, OFF, and both the MAIN BUS TIEs OFF. Over.
03 20 13 27
Jack Swigert (CMP): Okay.
03 20 13 28
Joe Kerwin (CAPCOM): Okay. Skip two, and then we want INTERIOR INTEGRAL LIGHTING, OFF; and INTERIOR FLOODLIGHT, OFF. Scratch out “Full dim or full bright.” Over.

Spacelog Apollo 13