- Vance Brand (CAPCOM)
-
13, Houston. We see you now in the AUTO maneuver. How are your error needles looking now?
- Jim Lovell (CDR)
-
Okay, Houston; Aquarius. We appear to be there—at the burn attitude. And now do you want us to change the DAP?
- Vance Brand (CAPCOM)
-
Roger, Jim. We have a procedure to give you for widening the deadband to 5 degrees for the PTC in the next 3 or 4 hours, if you're ready to copy.
Expand selection down Contract selection up - Vance Brand (CAPCOM)
-
Okay. VERB 21, NOUN 01, ENTER; 3011, ENTER; 44, ENTER. Now, that's the procedure for widening the deadband to 5 degrees with the DAP. Later on, prior to the burn, you would return the deadband to 1.4 degrees, and if you're ready to copy, I'll read you that.
- Vance Brand (CAPCOM)
-
Okay. To return the deadband later to 1.4 degrees: VERB 21, NOUN 01, ENTER; 3011, ENTER; 200, ENTER. Over.
- Fred Haise (LMP)
-
Okay, Vance. To widen the deadband, we'll enter a VERB 21, NOUN 01, ENTER; 3011, ENTER; 44, ENTER. Before the burn to go back to narrow deadband, it's VERB 21, NOUN 01, ENTER; 3011, ENTER; 200, ENTER.
- Jim Lovell (CDR)
-
And, Houston, I'll guess we'll do this PTC in yaw, and do you want them all powered down?
- Vance Brand (CAPCOM)
-
Okay, that's affirm. You'll be doing the PTC in yaw, and we'll give you a call at each time you change yaw—yaw attitude. Aside from that, request low bit rate off; then DOWN VOICE BACKUP OFF; then POWER AMPL OFF; and then FDAI OFF.
- Fred Haise (LMP)
-
Okay, Vance. On the power down, we go low bit rate; DOWN VOICE BACKUP, we'll pull the POWER AMPL breaker; and we'll power down the FDAI and the AC.
- Jim Lovell (CDR)
-
Oh, Vance, do you want to stay in this attitude for a certain length of time before we start maneuvering?
- Vance Brand (CAPCOM)
-
Roger. Jim, we'll keep you there for about an hour, and then we'll have our first 90-degree rotation.
Spoken on April 14, 1970, 9:40 p.m. UTC (54 years, 8 months ago). Link to this transcript range is: Tweet