Spacelog Apollo 13

Okay. We PRO on—after entering the 200. We'll get a flashing 0688. We then load the Sun unit vectors for 74 hours, which are R₁ plus 5—correction, plus 45498, R₂ plus 19024, R₃ plus 08250.

Roger. That's good, Fred-o. And that'll bring you to step 8, and you get a flashing 5018 when you PRO on the NOUN 88. Okay. At 5018, we want to do an AUTO maneuver to—to the attitude, so just do the—the PRO with the GUIDANCE CONTROL, PNGS; MODE CONTROL, PNGS, AUTO; and we'll take this attitude. Now, that's going to put us at—at attitude for the Sun check. Now, we're being a 1.4-degree deadband in this program in a docked configuration; so, to help you out, you could call VERB 62 to get your needles—and it—when the needles go through zero or null out and—in that deadband—then you take a look in the AOT and see how close the Sun is. And we want within plus or minus 1 degree. Over.

Okay. So we PRO on the NOUN 88, and we end up with a flashing 5018; and you want an AUTO maneuver here rather than using the TTCA, so we PRO with GUIDANCE, PNGS; MODE CONTROL, AUTO. We've got a 1.4-degree deadband with a VERB 62 will give us the needles to try to zero them in and, at that time I look through the AOT and, if it's like Apollo 11 Sun check, all we've got to have is the Sun somewhere in the—out there somewhere on the Sun as it passes. Is that correct?

I think that's a little tight; that's about a quarter degree. We can go a little bit out of that. Stand by 1. Fred, we'll get you an answer on that one. And also, if you'll stand by, we'll give you a DAP load for this maneuver. Over.

Okay. We'll—You'll give us a DAP load.

Roger. Stand by.

Aquarius, Houston. Fred-o, on that—to pass that check, the Sun is at—will subtend an arc of one-half degree in the AOT, so you can be two diameters off and still pass the check. Over.

Okay. It's a half a degree, and so we can be two Sun diameters off and still pass.

That's affirmative. And we want you to maneuver with a DAP of 0.2 of a degree a second. Over.

Okay. You want us to use a DAP of 0.2.

Okay. That DAP load, Fred-o, is 31120. Over.

Okay. 31120.

Roger. Now, if we pass that check, you can just terminate P52 right there, and we'll give you an attitude to go to a burn attitude, and from this we can get a star check. If you don't pass, we'd like you to do an alinement at 75 hours. And, if you're ready to copy, we have some Sun half-unit vectors and some Earth half-unit vectors at 75 hours. Over.

Stand by 1, Charlie.

Okay. Go ahead for 75 hours—Sun and Earth half-unit vectors.

Okay. The 5018 should look like R₁ plus 27030, R₂ plus 09030, R₃ plus 29080.

Roger. That's good readback. Now, we got one more procedure for you; and, right now, we got the rendezvous radar stowed and we won't be able to see anything out of detent 2, so we'd like you to position the radar to 0283; and we have a procedure for that. And we'd like you to do that right before you get the attitude. Over.

Okay. Stand by.

Okay. Go ahead.

Stand by.

Aquarius, Houston. On those 5018 angles we had at 74 hours, Fred, that was based on a VERB 49 to this attitude, and they will be incorrect for the two axis maneuvers, so you can just scratch them. Over.

Okay. You're saying the angles you gave me for the 5018, that was for a VERB 49, so they won't be good for the 5018, and we should scratch them.

That's affirmative. Okay. If you're ready to copy, I've got this rendezvous radar procedure. Over.

Okay. Go ahead.

Okay. It's about a 10-stepper, but real easy. Okay. On CB 16, EPS INVERTER 2, close. CB 11, AC BUS A BUS TIE INVERTER 2, close. Panel 14, verify INVERTER switch 2. CB 11 RENDEZVOUS RADAR 2, close. RENDEZVOUS RADAR, release. RENDEZVOUS RADAR to LGC on panel 3. Are you with me? Over.

Roger. I'm right up with you at step 6. Go ahead.

Okay, Fred. Good show. Step 6: VERB 41 NOUN 72 ENTER, plus all balls, plus 28300. Step 7: Monitor movement with VERB 16 NOUN 72. Step 8: CB 11 RENDEZVOUS RADAR 2, open. Are you with me? Over.

Stand by 1.

Okay. Go ahead now.

Roger. Step 9 is a VERB 44. Step 10: CB 16, EPS INVERTER 2, open. Over.

Okay. I got it.

Okay.

Do you want me to read it back now?

I got one more for you. You'll copy this and give me it all on the readback. Okay. Once you get the attitude and you want to use the—you want to get the AOT lamp, we got to go CB 16 EPS INVERTER 2, close; CB 11, AC BUS A AOT LAMP, close. After the P52, you can open CB 16 EPS INVERTER 2, and open CB 11 AC BUS A AOT LAMP and AC BUS A BUS TIE INVERTER 2. Over.

Okay. Stand by 1.

Okay. Let's see if I got it all. For rendezvous radar parking: first of all we want CB 16 EPS INVERTER 2, closed, CB 11 AC BUS A BUS TIE INVERTER 2, closed. Then on panel 14, verify INVERTER 2 selected. And CB 11 RENDEZVOUS RADAR 2 closed, both breakers. Then we are to pull the RENDEZVOUS RADAR RELEASE handle. On panel 3, we then want RENDEZVOUS RADAR to LGC. A VERB 41 NOUN 72 ENTER with plus all zips, plus 28300 in registers 1 and 2. GO on that. Then we monitor movement with the 16 72. After it gets parked, CB 11 RENDEZVOUS RADAR 2 open, followed by VERB 44 ENTER. And CB 16 EPS INVERTER 2 open. Now, when it comes time for the alinement to get an AOT lamp, CB 16, EPS INVERTER 2 closed, CB 11 AC BUS A AOT LAMP closed, and after the alinement is completed at CB 16, EPS INVERTER 2 open, CB 11 AC BUS A AOT LAMP open, CB 11 AC BUS A BUS TIE INVERTER 2 open.

Good readback, Aquarius. We'll—To get those needles on the VERB 62, we got to power up the commander's FDAI. We'll have that procedure for you shortly. Over.

Okay.

Charlie, Jim here.

Roger. Go ahead.

Have you run a Earth set alinement in the simulator with a docked configuration?