Jim Lovell (CDR)

Okay, Jack. Have I gotten your 360 on yaw and roll? I'm going to go to ATT HOLD.

Jack Lousma (CAPCOM)

Roger. And then we want to get the ball part down.

Jim Lovell (CDR)

Okay. I'm now in PGNS ATT HOLD. And are you reading my DSKY angles?

Jim Lovell (CDR)

Now, you want me to power down the ball, and if you'll give me the procedure for that, I'll do it right away.

Jack Lousma (CAPCOM)

Okay. We'll buy what you've got on the DSKY there, and we'd just like to go through an overall powerdown procedure, and in so doing we'll catch the ball and inverter and it will only take a few minutes. So are you ready to start on panel 11?

Jim Lovell (CDR)

Roger. Jack will copy, and I'll do the work.

Jack Lousma (CAPCOM)

Okay. Panel 11, top row, open all the circuit breakers.

Jim Lovell (CDR)

All circuit breakers on top row coming open.

Jim Lovell (CDR)

They're all open, top row.

Jack Lousma (CAPCOM)

Okay. Second row, close the first six on the left through the ISOL VALVE and open all to the right of that.

Jim Lovell (CDR)

Okay. First six on the left are closed—That's through the ISOL VALVE, but I opened up every one from there on.

Jack Lousma (CAPCOM)

Okay. Third row, open up the next five—correction—Open up the first five on the left, close AOT HEATER, close SIG CONDITIONER 1. Close ATTITUDE DIRECT, and open the rest on row three.

Expand selection up Contract selection down Close
Jim Lovell (CDR)

Do you want ATCA (PGNS) open?

Jack Lousma (CAPCOM)

Leave ATCA (PGNS) closed; four breakers on the third row must be closed. AOT HEATER, SIG CONDITIONER 1, and ATCA (PGNS), ATTITUDE DIRECT CONTROL. Our mistake, good going.

Jim Lovell (CDR)

Okay. I'm opening up ENGINE START OVERRIDE right now. And that row's taken care of.

Jack Lousma (CAPCOM)

Okay. On the fourth row. Open—From the left, open the first five—correction—Close the first five, and open CABIN FAN 1. Close the three GLYCOL PUMP circuit breakers; open all the COMM breakers, except for COMMANDER'S AUDIO; close it. All the PGNS breakers, open—correction—Open the first three PGNS breakers, close LGC/DSKY, IMU STANDBY, IMU OPERATE.

Jim Lovell (CDR)

That's complete, Jack.

Jack Lousma (CAPCOM)

Okay. And EPS, close BAT FEED TIES, CROSSTIE BAL LOAD, and open the CROSS TIE BUS. Close the next three; open ASCENT ECA CONTROL, ASCENT ECA, and INVERTER 1. Close DC BUS VOLT. Go ahead.

Jim Lovell (CDR)

That's complete, Jack. Panel 11 is configured.

Jack Lousma (CAPCOM)

Okay. Let's go over to panel 16, top row, and starting from the left—Open the first four.

Jim Lovell (CDR)

Okay. Starting from the left, open the first four.

Jack Lousma (CAPCOM)

Okay. And close the ISOL VALVE, keep your TCA breakers closed, close the CROSSFEED, open the next two displays. Close the MAIN SOV and the PROPULSION breakers should all three be open.

Jim Lovell (CDR)

Roger. The main valves are closed, and the DISPLAY ENGINE OVERRIDE LOGIC's coming open, and the PQGS and ASC He REG are open.

Jack Lousma (CAPCOM)

That's affirmative. The second row: they should all be open except for three breakers under instrumentation. Close SIG SENSOR, PCM/TE, and SIG CONDITIONER 2. Over.

Jim Lovell (CDR)

Roger. Do you want SUIT FLOW CONTROL open?

Jim Lovell (CDR)

ENGINE ARM coming open and ASA I guess will be open. Is that correct?

Jack Lousma (CAPCOM)

We just got a change on that. Let's keep the ASA closed.

Jim Lovell (CDR)

How about SUIT FLOW CONTROL and ENGINE ARM?

Jack Lousma (CAPCOM)

Okay, Jim. SUIT FLOW CONTROL can be open, and ENGINE ARM—ENGINE ARM open.

Jim Lovell (CDR)

Okay. Let's go to row 3.

Jack Lousma (CAPCOM)

Okay. Row 3 under COMM. Open DISPLAYS, close SE AUDIO, open VHF A TRANSMITTER and B RECEIVER, close the PRIMARY S-BAND circuit breakers, both of them. Open the S-BAND ANTENNA, PMP closed, TV open, and all the rest of them open under ECS, except CO2 SENSOR, closed.

Jack Lousma (CAPCOM)

Okay. Under row 4: under HEATERS, your RCS QUAD heaters should—four of them—be closed, open DISPLAYS, open S-BAND ANTENNA, open SEQUENCE CAMERA. Under EPS, open DISPLAYS, close DC BUS VOLT, open INVERTER 2, open ASCENT ECA CONTROL and ASCENT ECA, close DESCENT ECA, DESCENT ECA CONTROL, TRANSLUNAR BUS TIE, close CROSS TIE BAL LOADS, open CROSS TIE BUS, close BAT FEED TIES. Over.

Jim Lovell (CDR)

That's been completed, Jack.

Jack Lousma (CAPCOM)

Okay, Jim. And we've already got a change to what we just told you. Under ECS, close the CABIN REPRESS, and insure that the ASA BREAKER is closed under S and C.

Jim Lovell (CDR)

The ASA BREAKER is closed, but I closed the CABIN REPRESS.

Jack Lousma (CAPCOM)

Okay, Jim. Looks like what we have to do is—In order to maintain even heating, we just have to yaw the whole machine about 90 degrees per hour in increments. So we'll give you a call when it's time to yaw 90 degrees.

Jim Lovell (CDR)

Okay. We have to YAW the machine as I understand it, Houston, and you'll give it to me in increments of 90 degrees.

Jack Lousma (CAPCOM)

Okay, Jim. Your present configuration has the following features. We got the electrical BUSES cross tied through the BAL LOAD circuit breakers, and we have AUTO CABIN REPRESS. One thing we'd like to do right now is to give you an uplink, so immediately we have to, on panel 11, close the UPDATA LINK circuit breaker. Go to P00 and DATA. Over.

Jim Lovell (CDR)

Okay. We're going to P00 and DATA. The circuit breaker is closed.

Jim Lovell (CDR)

Houston, Aquarius. Did you say that you had a new pad for us to copy?

Jack Lousma (CAPCOM)

Jim, I passed that newest pad that we have to Fred about 30 minutes ago. That's our latest. It's PC plus 2, and it begins with NOUN 33 of 79 hours 27 minutes and 40.13 seconds. You got that one?

Jim Lovell (CDR)

Okay. We've got that one. What kind of a ATT HOLD MODE do you want us to do? Do you want us to do WIDE DEADBAND? I didn't … on the DAP.

Jack Lousma (CAPCOM)

Jim, the deadband is good the way it is. It's 5 degrees, if you want to stay in it. And stay in the PGNS ATT HOLD mode.

Jack Lousma (CAPCOM)

Two things, Jim. We want you to know that there's some pretty big attitude errors in, so if you go to AUTO, the computer is going to try to crank you around, and the other thing is don't drink water out of the LM.

Jim Lovell (CDR)

Okay. You might think about this. You know we lost our oxygen pressure in the command module.

Jack Lousma (CAPCOM)

Aquarius, we're finished with the uplink. The computer is yours, and you can open the UPDATA LINK circuit breaker.

Jim Lovell (CDR)

Okay. We've opened up the UPDATA LINK, and we've gone OFF of DATA, and I've got 16 20 in the computer.

Jack Lousma (CAPCOM)

Roger, Jim. I guess we're going to just kind of perk away here now.

Jack Swigert (CMP)

Okay, Jack. One more question about Odyssey here.

Jack Swigert (CMP)

Okay. How about the service module O2 supply valve? Do you want that off?

Jack Lousma (CAPCOM)

Affirmative. Service module O2 supply off, Jack.

Jack Lousma (CAPCOM)

And, Jim, we see a PROGRAM ALARM in there. We think it's just got to do with pulling the UPDATA LINK circuit breaker—UPLINK too fast.

Jim Lovell (CDR)

Roger. I don't see it. Should I reset?

Jack Lousma (CAPCOM)

Go ahead and reset, Jim.

Jim Lovell (CDR)

One thought that might occur here is that if we have low descent water pressure, we might consider taking the PLSS water and fill it in reverse. If that works, you might look at a procedure for that.

Jack Lousma (CAPCOM)

That's a good thought. Let us bounce that around a little.

Jack Lousma (CAPCOM)

Okay, Jim. That's a good thought, and we've looked at that, and it looks like that's feasible. So if and when we need to do that, we will.

Jim Lovell (CDR)

And, something else, Jack. When it's time for me to make my 90-degree yaw, what I planned on doing was going to NOUN 76 hold and just pulse and yaw several times until the yaw start and hope that pitch and roll stay within the limit.

Jack Lousma (CAPCOM)

Roger. It sounds like a good plan and you can use your TTCA in MIN IMPULSE to take care of pitch and roll.

Jack Lousma (CAPCOM)

Aquarius, Houston. We see ASCENT O2 tank number 2 building up again, so we'd like to use something out of it, so turn on ascent O2 tank number 2 and turn off descent O2.

Jim Lovell (CDR)

Roger. Opening up ascent O2 tank number 2, and turning off descent.

Jack Lousma (CAPCOM)

And, Aquarius, Houston. We're starting to think about CO2 buildup up in the command module there so we've got a recommendation, and what we're recommending is that you take the commander's hoses in the LM and put a cap over the red return hose and then figure out a way to fasten those hoses so they blow up into the CSM by extending them up through the tunnel as far as possible. And we'll get some flow out the blue side, circulate up and around the command module and to keep the CO2 level down.

Jim Lovell (CDR)

Roger. We're thinking of that too, and one problem is that the COMM is connected securely to the hose, so we've got to get the COMM cable off somehow to get that—So we'll still have COMM down here in the LM and you have the hose up there.

Jim Lovell (CDR)

Houston, we're trying to extend that commander's hose by use of the vacuum hose.

Jack Lousma (CAPCOM)

Sounds like a good plan if you can work that out, Jim.

Jack Lousma (CAPCOM)

Aquarius, if you can shake Jack loose there, I've got a—some procedures for him to write down.

Jack Swigert (CMP)

Okay, Jack. Is this a long one?

Jack Lousma (CAPCOM)

Oh, it's about 12—15 lines. It's a matter of verifying some valves and so forth.

Jack Lousma (CAPCOM)

Okay. We want you to go in when you can and verify the following valves and leave them as we outline here. REPRESS PACKAGE valve, off; EMERGENCY CABIN PRESSURE, off; DIRECT O2, off; DEMAND REG, off; both WATER ACCUMULATORS, off; MAIN REG A and B, open; WATER GLYCOL—correction—WATER and then GLYCOL TANK INLET and OUTLET, both. Now if you want to get some water, we recommend that you momentarily turn the SURGE TANK on to pressurize the system and then turn it off and take out water as required. Over.

Jack Lousma (CAPCOM)

That's it, Jack. And another note on taking water; if you don't drain enough water so that —

Jim Lovell (CDR)

That wasn't us, Jack.

Jack Lousma (CAPCOM)

Okay. One more note on the water, Jack. If you don't bleed the pressure off when you—don't take enough water to bleed the pressure off completely, the pressure that's left on there is going to drain away in a period of 1 to 3 hours. So it's a small amount of oxygen, but we might as well save it. So if you want to eliminate that problem you could completely drain the pressure off by putting the water in a water bag and saving it that way.

Jack Swigert (CMP)

Okay. That's a good idea.

Jack Lousma (CAPCOM)

So that's the end of my —

Jack Swigert (CMP)

What I'll do—let me repeat—Okay. Let me repeat it all back to you. REPRESS PACKAGE VALVE, off; EMERGENCY CABIN PRESSURE, off; DIRECT O2, off; both the DEMAND REGs, off; both H2O ACCUMULATORS, WATER GLYCOL ACCUMULATORS, off; MAIN REG A and B, open; WATER and GLYCOL TANK INLET and OUTLET, open; for water, momentarily pressurize the SURGE TANK, take out water as required. You're recommending drain out all the water until I can't get any more water out of it in order to conserve the oxygen.

Jack Lousma (CAPCOM)

Okay. We just want you to turn off the water accumulators and not the glycol accumulator. Over.

Jack Swigert (CMP)

Okay. These are the water accumulators on 382, right?

Jack Lousma (CAPCOM)

That's affirm. The accumulators on 382.

Expand selection down Contract selection up

Spoken on April 14, 1970, 10:47 a.m. UTC (53 years, 11 months ago). Link to this transcript range is: Tweet

Jim Lovell (CDR)

Roger, Jack. We're asking whether P51 and a P52 are required in the back side of the Moon.

Jack Lousma (CAPCOM)

I think so, Jim, but stand by while I verify it.

Joe Kerwin (CAPCOM)

We think we know where the platform is, Jim. The tracking looks real good from the last burn. We feel just a P52 will be required.