- Fred Haise (LMP)
-
Okay, I'm back on the checklist, page 6. Jack, under PGNS turn-on and self-test. We've done everything except the self test here on this page. Do you want to do that at this time?
- Fred Haise (LMP)
-
Okay. I'll scratch page 6 and on page 7, we're not going to activate the—or rather we had the S-band activated, ECS Activation I have all done. And, at the bottom of the page, the docked IMU coarse aline is done.
- Jim Lovell (CDR)
-
And, Houston, let's go to activation—or get into page 10 and see what we did there.
- Fred Haise (LMP)
-
Okay. The landing gear are down and locked, Jack, and looking ahead now at page 11, we've done all of that.
- Fred Haise (LMP)
-
Okay, and I assume in amongst all those numbers you pumped up, we got a REFSMMAT and STATE VECTOR, is that correct?
- Fred Haise (LMP)
-
Hey, on 13, you've read us up the fine aline angles and we've cranked those in.
Expand selection up Contract selection down Close - Jack Lousma (CAPCOM)
-
That's—Okay, Aquarius. We recommend omitting the DAP set, gimbal/throttle test—just make sure the gim—DECA POWER and DECA GIMBAL circuit breakers are closed.
- Fred Haise (LMP)
-
Okay, we're going to proceed now with the DAP set, gimbal/throttle test, is that correct? Or did you say delete it?
- Jack Lousma (CAPCOM)
-
Aquarius, delete the DAP set, gimbal/throttle test. Just ensure that the DECA POWER and the DECA GIMBAL are closed.
Expand selection down Contract selection up - Fred Haise (LMP)
-
Okay. Also out of that list, Jack, we need the COMMANDER's THROTTLE set to THROTTLE and MIN.
- Fred Haise (LMP)
-
Houston, if I recall the launch set of the gimbals, the GDAs are not correct here, and where are we going to get those set for the burn?
- Jack Lousma (CAPCOM)
-
Okay. Here's the word on the DAP set, gimbal/ throttle test. Let's do step 1 and step 2, and that'll get our gimbal set.
- Fred Haise (LMP)
-
Okay, Jack, we're going to have to back up on this, if we're going to follow the procedure here, which has us go MODE CONTROL; PGNS, AUTO, we're going to have to pull the TCA breakers to keep from firing jets.
- Jack Lousma (CAPCOM)
-
Stand by on step 1, Fred. We're getting the word for you. How do you like this SIM?
- Jack Lousma (CAPCOM)
-
Okay, Aquarius, we recommend you do the DAP set and gimbal/throttle test as per the checklist. Go PGNS AUTO and proceed.
- Jim Lovell (CDR)
-
Well, we're going to fire our thrusters as soon as we go to AUTO because we've got those thrusters in—the thruster circuit breakers. Do you want us to do that and stop?
- Jack Lousma (CAPCOM)
-
Okay, Aquarius, we're recommending you go to AUTO. Let the thrusters fire and settle down and proceed with the test.
- Fred Haise (LMP)
-
Okay, and Houston, you—you're looking at the weights now. Those are still good, right?
- Jack Lousma (CAPCOM)
-
Aquarius, Houston. We'd like you to recycle on the DAP load and change your DAP to 32021. Over.
- Jack Lousma (CAPCOM)
-
Okay, Aquarius. We're looking at your gimbal and we notice that we got a four-jet ullage loaded in the DAP and we gave you two jets on the pad. But, let's go with what we've got loaded. It'll be a four-jet ullage.
- Jack Lousma (CAPCOM)
-
Okay, your gimbals are within 0.3 and we're ready for the DPS pressurization and checkout.
Spoken on April 14, 1970, 8:13 a.m. UTC (54 years, 8 months ago). Link to this transcript range is: Tweet