- Jack Lousma (CAPCOM)
-
Okay, Jim. I think I'm reading Jack, now. But what we want him to do is to give us a command reset. And then power down the CMC, power down the IMU, turn the IMU heater off, leave battery A on. Over.
- Jack Swigert (CMP)
-
That's just about 80—in fact, 82 hours out of the two primary cartridges. That's two guys. 44 is what LC8 got. That would be 88 hours. We got a secondary. You're right. We're listening.
- Jack Swigert (CMP)
-
Yes, Jack. I read it back twice to you. Command reset, which I've done. I'm about to power down the IMU, power down the CMC, turn the IMU heaters off, leave BAT A on.
- Jack Swigert (CMP)
-
Okay. I just got a MASTER ALARM and MAIN BUS A UNDERVOLT. And I'm starting to power down, now. —
- Fred Haise (LMP)
-
We've lost—The only advantage to doing it early; if we can power back—the LM back down. The only advantage doing it early is you can do a big burn now and a midcourse and then power the LM down. Otherwise, we got to keep the LM powered up clear until we get around the Moon. Plus it would be inside on the burn. I just hope the G&N hangs up on—hangs in on this one—I'd sure hate to do that one manual.
- Jack Lousma (CAPCOM)
-
Odyssey, Houston. Couple circuit breakers for you. On panel 276, on our INSTRUMENTATION POWER CONTROL, open CB number 3 and number 4.
- Jack Lousma (CAPCOM)
-
That's affirmative, Odyssey. And also get your SCS electronics package and power off, and your FDAI POWER/GPI off, and your AUTO jet SELECT, all 16 off.
- Jim Lovell (CDR)
-
Jack, while he's doing that, copy down what you just said again. I want to write it down.
- Jack Lousma (CAPCOM)
-
Aquarius, we need to get your sublimator powered up, Activation page 20 and Activation page 21, step 3. Over.
- Jack Swigert (CMP)
-
That's Activation, page 20? Okay, Jack. Now I have to power down IMU. I have no control at all. I'm going to turn my 16 jets off, Say again the other things you wanted?
- Jack Lousma (CAPCOM)
-
Okay, Jack. We'd like you to turn off your O2 tank 2 heaters and fans. Correction—tank 1. Turn the fans and heaters off.
- Jim Lovell (CDR)
-
Okay. And, Jack, can we turn on the FDAI circuit breakers so we could have a ball to see if we go to gimbal lock or not?
- Jack Swigert (CMP)
-
Houston, he's going to give a 16 NOUN 20, Jack. And, okay, I've got O2 heaters and fans off in tank 1.
- Jack Lousma (CAPCOM)
-
Jim, we don't want you to power down the ball in the LM. We wanted you to power down the ball in the CSM.
- Jack Swigert (CMP)
-
I have the CMC and IMU in the command module is powered down. The heaters are out.
- Fred Haise (LMP)
-
And the EVAP flow valve, that's open now, and I've undone my suit hoses here and opened up the suit flow valves; so, we got air flowing in the LM now.
- Jack Swigert (CMP)
-
Okay, Jack. Do you want me to proceed by the SCS powerdown checklist? I did not copy the SCS items you wanted me to power down.
- Jim Lovell (CDR)
-
Okay, Jack. Tell me there. We need to know when we're getting close to gimbal lock in the LM. We have no balls right now.
- Jack Lousma (CAPCOM)
-
Okay. We want you to power up your eight-ball. We want you to get your RCS heaters on. Pressurize the RCS and open up the MAIN SOVs. Over.
- Fred Haise (LMP)
-
Okay, Jack. I got two commander FDAI breakers in, AC and DC, and the two GASTA breakers in AC and DC and next you'll want the RCS heaters all on with the—pressurize the RCS and then the MAIN SOVs open. And I think they're already open.
Expand selection down Contract selection up
Spoken on April 14, 1970, 5:33 a.m. UTC (54 years, 6 months ago). Link to this transcript range is: Tweet