- Fred Haise (LMP)
-
Okay. Right now, Houston, the voltage is—is looking good. And we had a pretty large bang associated with the CAUTION AND WARNING there. And as I recall, MAIN B was the one that had had an amp spike on it once before.
- Fred Haise (LMP)
-
Yes. That jolt must have rocked the sensor on—see now—O2 QUANTITY 2. It—was oscillating down around 20 to 60 percent. Now it's fullscale high again.
- Jim Lovell (CDR)
-
And, Houston, we had a RESTART on our computer and we had a PGNCS light and the RESTART RESET.
- Jim Lovell (CDR)
-
Okay. And we're looking at our S—SERVICE MODULE RCS HELIUM 1. We have—B is barber poled and D is barber poled, HELIUM 2, D is barber pole, and SECONDARY PROPELLANTS, I have A and C barber pole. BMAG temperatures?
- Jack Lousma (CAPCOM)
-
13, Houston. We'd like you to attempt to reconnect fuel cell 1 to MAIN A and fuel cell 3 to MAIN B. Verify that quad Delta is open.
- Fred Haise (LMP)
-
Okay, Houston. I'm showing—I tried to reset and fuel cell 1 and 3 are both showing gray flags, but they are both showing zip on the flows.
- Jack Lousma (CAPCOM)
-
That's affirmative. We're reading you. We're trying to come up with some good ideas here for you.
- Fred Haise (LMP)
-
Okay. Let me give you some reading … in the interim to help MAIN A voltage, Jack. I've got BUS TIE AC on.
- Fred Haise (LMP)
-
In the interim, to help out MAIN A voltage, I've got MAIN BUS TIE BAT AC on. Or would you rather accept the 25 volts we are seeing on MAIN A?
- Jack Lousma (CAPCOM)
-
13, Houston. We'd like you to verify couple of readings for us. We would like the nitrogen pressure on fuel cell 1. We need the oxygen pressure on fuel cell 2.
- Jim Lovell (CDR)
-
That's AC, okay. Yes, that's good AC and it looks to me, looking out the hatch, that we are venting something. We are venting something out into the—into space.
- Jack Lousma (CAPCOM)
-
13, Houston. We see you getting close to gimbal lock there. We'd like you to bring up all quad Cs on MAIN A, quad C-1, C-2, C-3, C-4 on MAIN A, and also bring B-3 and B-4 up on MAIN A.
- Jack Lousma (CAPCOM)
-
Okay. Can you tell us anything about the venting, where it is coming from, what window you see it at.
- Fred Haise (LMP)
-
It's coming out of window 1, right now, Jack, and could you give me the thrusters again?
- Jack Lousma (CAPCOM)
-
We'd like—on MAIN A, we'd like Charlie 1, 2, 3, and 4. Also Bravo 3 and 4 on MAIN A.
- Jack Lousma (CAPCOM)
-
Okay, 13; this is Houston. We'd like you to go to your G&C checklist, the pink pages, 1-5. Do powerdown until we get a Delta of 10 amps. Over.
- Jim Lovell (CDR)
-
Okay, Jack, say again that—… for the powerdown; it's not in the pink pages, the 1-5.
- Jack Lousma (CAPCOM)
-
Okay. We'd like you to go down that powerdown procedure until you get a Delta of 10 amps. Over.
- Jack Lousma (CAPCOM)
-
And, 13, you might also check for those pages in your launch checklist. They're emergency pages; pink pages, 1-5, and we'd like you to power down until you get —
- Jack Lousma (CAPCOM)
-
Roger. Power down until you get an amperage of 10 amps less than what you got now. Over.
- Jack Swigert (CMP)
-
Okay, Jack, and on this page 1-5, we proceeded right down the list, all the way down; we're right now at BMAG number 2 is in WARM UP.
- Jack Swigert (CMP)
-
Okay, and something is giving us a reach, Jack, both in pitch and roll, so I'm suspecting that maybe it's whatever it is that's venting back there. I've had to use DIRECT in order to stabilize this, and as soon as I do, we're starting to pick up rates again. Can you pick up any jets firing?
- Jack Lousma (CAPCOM)
-
13, Houston. We need to get some more instrumentation up. We'd like you to put INVERTER 1 on both AC BUSES. Over.
- Fred Haise (LMP)
-
Okay. Okay, you got INVERTER 1 on both AC BUSES now. And Jack, one of the items that we turned off was the—all the fuel cell pumps. Okay, and you might let us know when fuel cell 2 needs its pump back; we ought to take care of that guy.
- Jack Lousma (CAPCOM)
-
Okay, 13. We've got lots and lots of people working on this; we'll give you some dope as soon as we have it, and you'll be the first one to know.
- Fred Haise (LMP)
-
Okay, Jack, and the weird configuration we're sitting in now is we have the hatch installed, we still have the probe and drogue inside the command module, and we're going to stay in this situation until you—kind of give us an okay to reinstall the probe and drogue.
- Jack Lousma (CAPCOM)
-
13, this is Houston. We'd like to power down just a little bit more, so let's get BMAG 2 OFF; and make sure your lights are down. Over.
- Jack Lousma (CAPCOM)
-
And 13, Houston. We'd like you to turn all your Bravo thrusters OFF; and put all your Delta thrusters on MAIN A, please.
- Jack Lousma (CAPCOM)
-
That's affirmative. And we're trying to get power to that tank. Stand by; we're working on it.
- Jack Swigert (CMP)
-
Let's read you the lights we got on now; CRYO PRESS, FUEL CELL 1, FUEL CELL 3, MAIN BUS B UNDERVOLT, SUIT COMPRESSOR.
- Jack Lousma (CAPCOM)
-
Roger, we copy them and we'd like to build up the pressure in O2 tank 1, so turn the heaters on manually; we'll watch the pressure for you.
- Jack Lousma (CAPCOM)
-
13, Houston. We'd like you to additionally bring on the fans in O2 tank 1, and we can stand the additional amperage on that.
- Jack Lousma (CAPCOM)
-
13, Houston. We'd like you to check some circuit breakers on panel 226. CRYO O2 HEATER number 1 MAIN A, and check the three CRYO FAN MOTORS, TANK 1, three phases.
- Fred Haise (LMP)
-
Okay, Jack. 226 is configured just like it should be. I got three REACS breakers and three RAD breakers open. All the rest are closed.
- Jack Swigert (CMP)
-
Jack, looking outside, the number of particles has diminished greatly, almost ceased now, which indicates maybe what was venting has almost stopped.
- Jack Lousma (CAPCOM)
-
13, this is Houston. We'd like you to give us a survey of your displays on MDCs 1 and 2. Give us gage readings and talkbacks. Over.
- Jack Swigert (CMP)
-
Okay, Jack. On MDC 1, there's nothing abnormal. All the rate indicators are zero. Ball number 2 is frozen, of course; we lost MAIN B. I've got—Ball number 1 appears to be working normally. Right now I'm sitting at roll 0, pitch 180, and yaw about 13 degrees. I'm going to try and hold 0, 180, and 0.
Expand selection down Contract selection up
Spoken on April 14, 1970, 3:21 a.m. UTC (54 years, 6 months ago). Link to this transcript range is: Tweet